Sign In
Register
eISSN:2278-5299

International Journal of Latest Research in Science and Technology

DOI:10.29111/ijlrst   ISRA Impact Factor:3.35

A News Letter Sign UP!
INFLUENCE OF HARDNESS PROFILE ON FATIGUE FAILURES OF CASE HARDENED RACES

Research Paper Open Access

International Journal of Latest Research in Science and Technology Vol.4 Issue 5, pp 43-46,Year 2015

INFLUENCE OF HARDNESS PROFILE ON FATIGUE FAILURES OF CASE HARDENED RACES

Matja? Torkar, Bojan Podgornik, Franc Tehovnik

Correspondence should be addressed to :

Received : 23 September 2015; Accepted : 02 October 2015 ; Published : 31 October 2015

Share
Download 126
View 179
Article No. 10567
Abstract

Different case hardened races, as a part of a constant velocity joint, were dynamic loaded and investigated. The visual inspection revealed the flaking of the surface on some races. The metallography of cross section of case hardened layer detected damaged surface and fatigue cracks below the surface. Both phenomena were results of differences in hardness profile and consequently concentration of stresses below the surface of case hardened layer. The fatigue failures were more pronounced at higher hardness of case hardened layer. For longer life time of the race is important to adjust the thickness and the hardness of case hardened layer to the position of predicted stress concentration below the surface.

Key Words   
Case hardened race; Fatigue cracks; Deformed martensite; Failure analysis

Copyright
References
  1. http:// www.google.com
  2. Chul-Hee Lee, Andreas A. Polycarpou, A phenomenological friction model of tripod constant velocity (CV) joints, Tribology International Volume 43, Issue 4, April 2010, Pages 844-858
  3. H. Lee, Development of a semi-empirical friction model in automotive driveshaft joints, International Journal of Automotive Technology, 2008, Volume 9, Number 3, Pages 317-322
  4. Kosenko, E. Aleksandrov, Volumetric modification of the Hertz contact problem and its application to the multibody dynamics simulation, Journal of Mechanical Science and Technology, Volume 23, Number 4, (2009), Pages 931-937
  5. Yonming Liu, Liming Liu, Sankaran Mahadevan, Analysis of subsurface crack propagation under rolling contact loading in railroad wheels using FEM, Engineering Fracture Mechanics 74 (2007), Pages 2659-2674
  6. Stalin-Muller, K.Dang Van, Numerical simulation of the sliding wear test in relation to material properties, Wear , Vol. 203-204, March 1997, Pages 180-186
  7. S. Ahn, B.J. Roylance, Stress behaviour of surface-coated materials in concentrated sliding contact, Surface and Coatings Technology, Volume 41, Issue 1, February 1990, Pages 1-15
  8. Mechanical Engineering Design, ed. Joseph E. Shigley, Charles R. Mischke, Richard G. Budynas, Mc Graw-Hill, 2004
  9. ASM Handbook Volume 11, Failure Analysis and Prevention, R. Ahmed, Rolling contact fatigue (ASM International), 2002, Pages: 941-956
  10. J.L. Fernandes, Contact fatigue in rolling-element bearings, Engineering Failure Analysis, Volume 4, Issue 2, June 1997, Pages 155-160
  11. Hong, J.Y. Ooi, B. Shaw, A numerical simulation to relate the shot peening parameters to the induced residual stresses, Engineering Failure Analysis, Volume 15, Issue 8, December 2008, Pages 1097-1110
  12. Hyung-Kyu Kim, Sung-Han Park, Hwan-Gyu Lee, Dong-Ryun Kim, Young-Ho Lee, Approximation of contact stress for a compressed and laterally one side restrained O-ring, Engineering Failure Analysis, Volume 14, Issue 8, December 2007, Pages 1680-1692
  13. Komiya, Rolling bearing lubrication technology trends and R&D efforts, JTEKT Engineering Journal English edition, No. 1003, 2007, 50-58
  14. Gutkina and B. Alfredsson, Growth of fretting fatigue cracks in a shrink-fitted joint subjected to rotating bending , Engineering Failure Analysis, Volume 15, Issue 5, July 2008, Pages 582-596
  15. B. Waterhouse, Fretting Corrosion, Pergamon Press, Oxford, 1972
  16. Chul-Hee Lee, Jae Young Choi, In Sik Jeon, Wonoh Cho, Hyukchae Yun, Grease degradation in constant velocity (CV) joints, Trybology Transactions, 54, 2011, Pages 825-831

 

To cite this article

Matja? Torkar, Bojan Podgornik, Franc Tehovnik , " Influence Of Hardness Profile On Fatigue Failures Of Case Hardened Races ", International Journal of Latest Research in Science and Technology . Vol. 4, Issue 5, pp 43-46 , 2015

Responsive image

MNK Publication was founded in 2012 to upholder revolutionary ideas that would advance the research and practice of business and management. Today, we comply with to advance fresh thinking in latest scientific fields where we think we can make a real difference and growth now also including medical and social care, education,management and engineering.

Responsive image

We offers several opportunities for partnership and tie-up with individual, corporate and organizational level. We are working on the open access platform. Editors, authors, readers, librarians and conference organizer can work together. We are giving open opportunities to all. Our team is always willing to work and collaborate to promote open access publication.

Responsive image

Our Journals provide one of the strongest International open access platform for research communities. Our conference proceeding services provide conference organizers a privileged platform for publishing extended conference papers as journal publications. It is deliberated to disseminate scientific research and to establish long term International collaborations and partnerships with academic communities and conference organizers.