Sign In
Register
eISSN:2278-5299

International Journal of Latest Research in Science and Technology

DOI:10.29111/ijlrst   ISRA Impact Factor:3.35

A News Letter Sign UP!
MECHANICAL EVALUATION OF POLYVINYL-ACETATE (PVA)-POLYOL ANDKAOLIN SPECIMENS

Research Paper Open Access

International Journal of Latest Research in Science and Technology Vol.5 Issue 1, pp 142-145,Year 2016

MECHANICAL EVALUATION OF POLYVINYL-ACETATE (PVA)-POLYOL ANDKAOLIN SPECIMENS

Thamir Salman Bachari

Correspondence should be addressed to :

Received : 12 February 2016; Accepted : 20 February 2016 ; Published : 29 February 2016

Share
Download 125
View 177
Article No. 10627
Abstract

Specimens of polyvinyl-acetate (PVA)-polyol blend by percentages by weight 3:1 have been prepared with percentage by weight of kaolin (20wt%) at different particles size (75µm, 212µm, 300µm, 600µm and 2.36 mm.) as dumbbell shape. These are specimens (1, 2, 3, 4 and 5). Tension test of these specimens were measured such as tensile modulus, begin (σlow), tensile modulus, end (σhigh), tensile strength (σM) and tensile strength at break (σB). The measured values of tensile strength (σM) of specimens (1, 2, 3, 4 and 5) are (1.41, 0.731, 0.873, 1.55 and 0.880 MPa), the tensile strength at break is (0.955, 0.461, 0.537, 1.23 and 0.657 MPa). The calculated values of final lengths at break according to the adjustment gauge length of the machine are Lo = 60 mm. at both ends of the specimens are (65.949, 68.304, 66.913, 67.224 and 65.112 mm). These values are investigated.

Key Words   
PVA, Polyol, Kaolin, Specimens, Mechanical evaluation

Copyright
References
  1. K. G. Satish, B. Siddeswarappa and K. M. Kaleemulla, (2010), Characterization of In-Plane Mechanical Properties of Laminated Hybrid Composites, Journal of Minerals& Materials Characterization & Engineering, Vol. 9, No.2, pp.105-114.
  2. S. N. Mustafa, (2012), Effect of Kaoline on the Mechanical Properties of Polypropylene/Polyethylene Composite Material, Diyala Journal of Engineering Sciences, Vol. o5, No.02, pp.162-178.
  3. S. A. Altaf, Dr. V. Pandurangadu and Dr. K. Palanikuamr, (20110, Mechanical Properties of Green Coconut Fibre Reinforced HDPE Polymer Composite, international Journal of Engineering Science and Technology (IJEST), Vol.3 No.11, pp.7942-7952.
  4. J. R. M. D, Almeida and L. H. De Carvalho, (1988), An Investigation on the Tensile Strength of Particulate filled polymer Composites, Journal of Material Science 33, pp. 2215-2219.
  5. G. C. Jacob, J. M. Starbuck, J. F. Fellers, S. Simunovic and R. G. Boeman, (2004), Strain Rate Effects on the Mechanical Propoerties Of polymer composite Materials, Published online in Wiley Interscience (www.interscince.wiley.com), pp.296-301.
  6. A. K. Bhowmick, (2014), Mechanical Propertes of Polymers, Materials Science and Engineering-Vol.1, © Encyclopedia of Life support Systems (EOLSS).
  7. Hook's Law (2014), Mechanical Properties of Metal.
  8. A. Grujic, N. Talijan, D. Stojanovic, J. Stajic-Trosic, Z. Bruzic, Lj. Balanovic and R. Aleksic, (2010), Mechanical and magnetic Properties of composite Materials with Polymer Materix, J. Min. Metall. Sect. B-Metall. 46 (1), pp.25-32.
  9. A. M. Bragov and A. K. Lomunov, (1994), Mechanical Properties of Some Polymers and Composites at Strain Rates of 1000/s, Journal of DE Physique IV, Collogue C8, Supplement au Journal de Physique III, Volume 4, pp. C8-337-C8-342.
  10. S. Y. Fu, X. Q. Feng, B. Lauke and Y. W. Mai, (2008), Effect of particle Size, Particle/Matrix Interface Adhesion and Particle Loading on Mechanical Properties of Particulate-Polymer Composite, Science Direct, composites Part B: Engineering (39), pp.933-963.
  11. T. S. Bachari (2014), Mechanical Propeties of Polyvinyl-Acetate and toluene Diisosyanate and Sulfonated Phenol-Formaldehyde )SPF) Foam Composites, Journal of Natural Sciences Research, IISTE Publisher, Vol.4, No. 21, pp. 59-64.
  12. Zhang, X. Y. Cao, Y. M. Ma, Y. C. Ke, J. K. Zhang and F. S. Wang, (2011), the effect of Particle Size and Content on the Thermal conductivity and Mechanical Properties of Al2O3/high density polyethylene (HDPE) Composites, eXPRESS Polymer Letters Vol. 5, No. 7, pp.581-590.
  13. Y. P. Mamunya, V. V. Davydenko, P. Pissis and E. V. Lebedev, (2002), Electrical conductivity of Polymers Filled with Metal Powders, Elsevier Science Ltd. European Polymer Journal 38, pp.1887-1897.
  14. Y. P. Mamunya, V. V. Davydenko, P. Pissis and E. V. Lebedev, (2002), Electrical Conductivity of Polmers Filled with Metal Powders, Elsevier Science Ltd. European Polymer Journal 38, pp.1877-1897.
To cite this article

Thamir Salman Bachari , " Mechanical Evaluation Of Polyvinyl-acetate (pva)-polyol Andkaolin Specimens ", International Journal of Latest Research in Science and Technology . Vol. 5, Issue 1, pp 142-145 , 2016

Responsive image

MNK Publication was founded in 2012 to upholder revolutionary ideas that would advance the research and practice of business and management. Today, we comply with to advance fresh thinking in latest scientific fields where we think we can make a real difference and growth now also including medical and social care, education,management and engineering.

Responsive image

We offers several opportunities for partnership and tie-up with individual, corporate and organizational level. We are working on the open access platform. Editors, authors, readers, librarians and conference organizer can work together. We are giving open opportunities to all. Our team is always willing to work and collaborate to promote open access publication.

Responsive image

Our Journals provide one of the strongest International open access platform for research communities. Our conference proceeding services provide conference organizers a privileged platform for publishing extended conference papers as journal publications. It is deliberated to disseminate scientific research and to establish long term International collaborations and partnerships with academic communities and conference organizers.